E-mail:qin@bestfluoro.com
Tel:021-56830399
联系我们
    上海佑孚贸易有限公司
    地址:上海市宝山区长临路913号4022室

    电话:021-56830399

    手机:13611954539
    电邮:qin@bestfluoro.com


复合材料trasys脱模剂


蜜蜡复材液体脱模蜡P525 Honey Wax Hydro Speed
Honey Wax® Hydro Speed Honey Wax® Hydro Speed is a unique, high gloss wax emulsion for use by composite fabricators as a mold release agent. It is compounded with the purest grade carnauba wax, plus special binders and spreading agents.

Stoner NIX STIX G415 L-796 Mold Release导管尖端成型脱模剂
G415 L-796导管尖端成型脱模剂具有卓越的润滑剂保证在较少时间,形成完美聚合管尖,亦较少瑕疵产生。高效润滑剂只需要很少的分量。多余的润滑剂可除去异丙醇。通过生物适应性测试,可用于医用部分

Styrid®
Styrid® is a unique styrene suppressant that WILL NOT hinder interlaminar bonding in polyester resins. It provides suppression rates in excess of 50% and has the further added benefit of not coagulating, or coming out of solution when the resin with added Styrid® is exposed to cold tempera

BuffAway™ 2000 Polishing Compound
BuffAway™ 2000 is our newest and best polish for achieving the ultimate in surface perfection and gloss. Minor scratches and swirl marks are easily removed leaving a mirror finish on polyester production and tooling gel coats.

BuffAway™ 1000 Cutting Compound
BuffAway™ 1000 is our newest and best compound for the removal of 600 grit scratches, heavy orange peel, and surface oxidation from polyester tooling and production gel coats. Its water based formula requires half the amount of material to get the job done compared to traditional cutting compo

KantStik® Mold Cleaner
KantStik® Mold Cleaner is a special blend of solvents designed to dissolve and quickly remove most release agents and resin buildup on molds without dulling the surface.

M714 Stoner Thermoset Mold Release
Thermoset Mold Release M714 Stoner Thermoset Mold Release

E497
Stoner E497 Thermoset Mold Release is specially formulated as release agent and anti-stick lubricant for molded thermoset plastics, rubber, and similar materials. It allows molded parts to be painted, plated, hotstamped, adhesive bonded, labeled, or otherwise decorated.

E455
Thermoset Mold Release Stoner E455 Thermoset Mold Release is specially formulated as release agent and anti-stick lubricant for compression molded reinforced thermosets. It allows molded thermoset parts to be painted, plated, hotstamped, adhesive bonded, labeled, or otherwise decorated.

E408
Dry Film Mold Release Stoner E408 Dry Film Mold Release is an extremely versatile release agent and anti-stick lubricant for molded materials such as plastics, rubber, composites, and similar materials. This dry, anti-stick surface coating provides fast, easy part removal from molds and multiple pa

Honey Wax® 250
Honey Wax® 250 is an extremely easy to apply and remove mold release paste wax that has a creamy consistency allowing for an excellent yield. When dry, Honey Wax® 250 leaves a smooth, hard, glossy surface.

Honey Wax® 100
Honey Wax® 100 is the same easy to spread and easy to remove mold release paste wax as our premium Honey Wax®, but without any silicone in the formula. If your process absolutely requires a paste wax without silicone, this is the product to use. When dry, Honey Wax® 100 leaves a smo

Honey Plus®
Honey Plus Wax is a high temperature version of Honey Wax®, formulated to work with high exotherm resins up to 240° F.

Honey Wax®
Honey Wax is a high gloss paste wax for use as a mould release agent. It creates a durable wax surface that remains intact for multiple pulls. Easy to apply, soft release paste wax that buffs to a high gloss finish. Minimal wax built up over time and is excellent for breaking in new moulds.

Releasers FRP-SC G495
Releasomer™ FRP-SC Semi-Permanent Mold Release

TraSys9825脱模剂
TraSys9825脱模剂 Mold Release Agent