E-mail:qin@bestfluoro.com
Tel:021-56830399
联系我们
    上海佑孚贸易有限公司
    地址:上海市宝山区长临路913号4022室

    电话:021-56830399

    手机:13611954539
    电邮:qin@bestfluoro.com


橡胶模具trasys脱模剂


A245
Mold Lubricant & Release Agent Water-based mold release for molded rubber and plastics.

TraSys3000
Release Coating Water-based release agent for rubber, fl uoropolymer, epoxy, and plastic laminates. Yields up to 4 times more releases per cycle then ordinary rubber mold release. Ideal for compounds that exceed 193°C (380°F).

TraSys423
Release Coating TraSys®423 release coating is a water-based dispersion designed for water stripping operations and can be applied to flexible or rigid mandrels. When applied to a mandrel, it exhibits outstanding release or antistick properties and has a very low coefficient of friction. It is

G449/G450/G483
XC-33M Mold Release / RR-5 Cold EF-1 Mold Pre-Treatment / RR-5 Hot EF Mold Release Agent

E474
Zinc Stearate Mold Release Zinc Stearate, our most powerful mold release, provides a heavy duty film on mold surfaces to keep difficult parts from sticking. Especially useful for testing new molds. Non-flammable aerosol.

E436
Mold Release & Ejector Pin Lube Prevents parts from sticking in your molds and lubricates ejector pins and other moving parts. Food grade and paintable in most applications. Non-flammable aerosol.

E408
Dry Film Mold Release E408 is a non-flammable PTFE dry film aerosol that’s used in making printed circuit boards where they often use epoxy resin – it’s also very versatile, releasing plastics, rubber, and certain composites. Contains no silicones or waxes and is paintable.

E408
Dry Film Mold Release E408 is a non-flammable PTFE dry film aerosol that’s used in making printed circuit boards where they often use epoxy resin – it’s also very versatile, releasing plastics, rubber, and certain composites. Contains no silicones or waxes and is paintable.

A373
Fluoroelastomer Mold Release Effective on all fluorels, vitons and other fluorocarbons. Colorless, non-flammable, non-CFC, and non-methylene chloride.

A353
Endurance Mold Release Effective on all elastomers including EPDM, nitrile, and neoprene. Colorless, non-flammable, non-CFC, and non-methylene chloride.

A324
Rapid Release Releases silicone rubber, thermoset, rubber, and similar materials from metal, plastics, rubber, and silicone rubber molds. Gives superior surface finish on cast parts. Useful in rapid prototyping processes such as stero lithography.