E-mail:qin@bestfluoro.com
Tel:021-56830399
联系我们
    上海佑孚贸易有限公司
    地址:上海市宝山区长临路913号4022室

    电话:021-56830399

    手机:13611954539
    电邮:qin@bestfluoro.com


滚塑模具trasys脱模剂


Stoner M520 ZIP-SLIP滚塑脱模剂
Stoner® M520 ZIP-SLIP® willhelp you save time, money and improve part quality. ZIP-SLIP® isan excellent preventative maintenance product when applied to the parting lineof the mold. ZIP-SLIP® willhelp eliminate unwanted build-up of resin on the parting line that can cause gaps, l

TraSys4000滚塑脱模剂
TraSys® 4000 TraSys® 4000 RotoFlowTM Mold Coating TraSys® 4000 RotoFlowTM Mold Coating helps facilitate the flow of polyolefin and nylon resin into hard-to-fill areas of rotational molds to fill in voids around inserts, tight radii, threads, and deep cavities as well as removing pin

TraSys715滚塑脱模剂
Mold Release Coating TraSys®715 mold release coating is a translucent, water-based dispersion for rotational molding applications. When applied to a mold, it exhibits outstanding release or antistick properties and has a very low coefficient of friction. It is clean, nonoily, nonstaining, chem

TraSys500滚塑脱模剂
Mold Release Coating Water-based, semi-permanent mold release for high heat and open flame rotational molding applications. TraSys 500 has a very low friction coefficient and it exhits outstanding release and anti-stick properties. Chemically inert. Functions in temperatures of 600°F 315°C or highe

TraSys420滚塑脱模剂
Mold Release Coating Water-based, semi-permanent mold release for rotational molding applications. TraSys 420 has a very low friction coefficient and it exhibits outstanding release and anti-stick properties. Chemically inert. Functions in temperatures of 500°F 260°C or higher.

TraSys414滚塑脱模剂
Release Coating TraSys® 414 heavy-duty mold release coating is a translucent water-based dispersion for rotational molding applications. When applied to a mold, it exhibits outstanding release or antistick properties and has a very low coefficient of fiction.

P448滚塑脱模剂
Heavy Duty Mold Release Water-based, semi-permanent mold release coating formulated with a more aggressive reactive curing release system for large flat applications and parts with difficulty containing warpage. Excellent warpage control. Very good on cross linked polyethylene (XLPE). Chemicaly ine

P446滚塑脱模剂
Releasomers Mold Release Water-based, semi-permanent mold release coating for rotational molding applications. High concentration formula is excellent for parting lines, removable pins, and parts requiring high release. Chemically inert. Freeze/thaw stable.

P442滚塑脱模剂
Mold Release Agent Water-based, semi-permanent mold release coating for rotational molding applications. Contains our highest concentration of active release ingredients for difficult applications including cross linked polyethylene (XLPE). Chemically inert. Freeze/thaw stable.

P441滚塑脱模剂
Heavy Duty Mold Release Agent Water-based, semi-permanent mold release coating for rotational molding applications. This general purpose mold release contains twice the amount of active ingredients found in P440 for better performance. Chemically inert. Freeze/thaw stable.

P440滚塑脱模剂
Mold Release Agent Water-based, semi-permanent mold release coating for rotational molding applications. This general purpose mold release exhibits outstanding release and anti-stick properties. Our lowest concentration formula. Chemically inert. Freeze/thaw stable.

P160滚塑脱模剂
Mold Release Coating Water-based release agent for polyurethanes, plastics, rubber and other materials. Stoner P160 prevents molded rotational parts from sticking, provides fast, easy part removal from molds, and provides multiple part releases in some applications.