E-mail:qin@bestfluoro.com
Tel:021-56830399
联系我们
    上海佑孚贸易有限公司
    地址:上海市宝山区长临路913号4022室

    电话:021-56830399

    手机:13611954539
    电邮:qin@bestfluoro.com


当前位置:首页 > 产品目录

产品目录


TraSys9825脱模剂
TraSys9825脱模剂 Mold Release Agent

喷丝板高温润滑剂脱模剂雾化硅油S286 Spinmax Spinneret Lube
Spinmax Spinneret Lube This products has been specifically formulated to lubricate spinneret dies when extruding synthetic fibers. Permits smooth spinneret operation, makes scrapes faster and easier, and improves spinneret performance by providing long lasting lubrication, even when die temperature

S276
SpinMore Spinneret Lubricant Spinnerette Lubricant is a release agent used in high temperature melt spinning process of synthetic fibres including Nylon and Polyester. As an active agent it contains silicone compound with excellent stability.

stoner S261 spinneret Lubricant 喷丝板润滑剂
Spinneret Lubricant Spinneret Lube S261 is what a large operation in Europe is buying -Non chlorinated, etc. Some flammability issues. Potential for flash.

A245
Mold Lubricant & Release Agent Water-based mold release for molded rubber and plastics.

TraSys3000
Release Coating Water-based release agent for rubber, fl uoropolymer, epoxy, and plastic laminates. Yields up to 4 times more releases per cycle then ordinary rubber mold release. Ideal for compounds that exceed 193°C (380°F).

TraSys423
Release Coating TraSys®423 release coating is a water-based dispersion designed for water stripping operations and can be applied to flexible or rigid mandrels. When applied to a mandrel, it exhibits outstanding release or antistick properties and has a very low coefficient of friction. It is

G449/G450/G483
XC-33M Mold Release / RR-5 Cold EF-1 Mold Pre-Treatment / RR-5 Hot EF Mold Release Agent

E474
Zinc Stearate Mold Release Zinc Stearate, our most powerful mold release, provides a heavy duty film on mold surfaces to keep difficult parts from sticking. Especially useful for testing new molds. Non-flammable aerosol.

E436
Mold Release & Ejector Pin Lube Prevents parts from sticking in your molds and lubricates ejector pins and other moving parts. Food grade and paintable in most applications. Non-flammable aerosol.

E408
Dry Film Mold Release E408 is a non-flammable PTFE dry film aerosol that’s used in making printed circuit boards where they often use epoxy resin – it’s also very versatile, releasing plastics, rubber, and certain composites. Contains no silicones or waxes and is paintable.

E408
Dry Film Mold Release E408 is a non-flammable PTFE dry film aerosol that’s used in making printed circuit boards where they often use epoxy resin – it’s also very versatile, releasing plastics, rubber, and certain composites. Contains no silicones or waxes and is paintable.